What you could try to Commissioning jobs your MOSFET if necessary, would be a resistor on the output of the 555 (~ 1 k), then the Treiberstufe...ich prefer da en duos from bc557/547. Or a finished driver module (MCP1407)
Then a resistor of ~ 560R and ne 1n4007 to do so.
then it need still a capacitor parallel to the primary coil...~ 0 68µ 400V or something. This should be fixed pulse!
Switching off causes the diode to the gate formality, similar to a Pulldownwiderstand, so not anti para
I was not quite sure whether the so heißt...hatte I in the other fred schnmal asked a nobody has replied
I have read also recently, I go easy time of it that very few people know that
I called it not exactly...because if a you led and switch a diode antiparallel to, does that mean that they are connected to parallel... Transformers the same: of a transformer with reverse direction parallel to the other switches, so that the output voltages different phasing out...
Edit: got namely the other contribution already gegoogled if this could be so right
And so ne diode takes over the function of a switch, if I have understood this correctly.
I have shown it now so structured as arc hunter. Much has not changed this unfortunately, the MOSFET is still extremely hot.
If I'm a capacitor parallel to the primary coil of the Flyback transformers, (2 x 220nF 400 V ~) will output of something big and me flying
After about 10 seconds the MOSFET to the ears. I have a feeling that the 555 is not the yellow of the egg when it comes to efficiency.
Không có nhận xét nào:
Đăng nhận xét